We are industrial gases manufacturer, here I will tell you some tech about storing CO2 cylinders.
Here's a list of precautions to be taken while storing CO2 cylinders.
1. While storing empty CO2 cylinders, take care to close the valve tightly. The valve must be opened only when the gas is being used and closed when the gas is not in use.
2. It is generally recommended that CO2 cylinders must be stored standing on their base. However, many industries also store them lying on their side.
3. Avoid storing a charged CO2 cylinder in the cab portion of any vehicle or in a passenger vehicle.
4. Never store them in a place where they accidentally or knowingly become a part of the electrical circuit.
5. The pressure of your cylinder should be 880 psi (for brewing industry). The CO2 is cold enough to turn into a liquid at 880 psi
6. The storage area where CO2 cylinders are stored should:
7. Be free from a corrosive atmosphere and dry.
8. Be generously ventilated, because as little as 15% of the gas’ concentration would be responsible for unconsciousness within a minute.
9. Be away from direct heat (continuous or intermittent). A well-charged CO2 cylinder operates its safety relief devices when the pressure exceeds 2800-3000 psi and could escape through the safety relief device at a temperature of approximately 150°F (65.6°C). If the cylinder is slightly over-filled, it may escape even at a lower temperature. So, the ideal temperature to store these cylinders is below 125°F (51.7°C).
10. Be away from or protected from the edge of elevated areas, if the cylinder rolls it can cause hazardous damage to the cylinder, valve, property, or human beings in the nearing areas.
11. Be away from heavy traffic areas as in crowded places, the chances of accidents increase.
